Ultracrete : Products - Products

Envirobed HA104®: Manhole Bedding Mortar product shot

Envirobed HA104®: Manhole Bedding MortarEnvirobed HA104® is the proven, trusted environmentally friendly bedding mortar containing recycled glass that has been used by local authorities, contractors and leading utility companies across the UK and Ireland for over 10 years. Following development and exhaustive trials spanning nearly 7 years, Envirobed HA104® has experienced zero failures. Envirobed HA104® is the recommened mortar for our coverTEC D400 composite covers and frames. Extreme road conditions, call for extreme performance - Envirobed HA104® delivers.

PY4: Manhole Bedding Mortar product shot

PY4: Manhole Bedding MortarA two-part component, fast setting polyester resin mortar. Particularly suitable for the rapid installation and reinstatement of manhole frames, gully grates, kerbs and street furniture in heavily trafficked areas.

M60: Manhole Bedding Mortar product shot

M60: Manhole Bedding MortarA rapid strength bedding mortar suitable for use with all ironwork conforming to BS EN124 as well as for the rapid bonding of granite setts and flags, emergency repairs, bedding of kerbs etc. M60 is suitable for use with our coverTEC B125 composite covers and frames.

SCJ: Bitumen Spray Sealer & Tack Coat product shot

SCJ: Bitumen Spray Sealer & Tack CoatUltracrete SCJ is a bitumen cold joint sealant spray, designed to seal and waterproof before the application of our cold lay asphalt, when repairing potholes and reinstating ductile and composite manhole covers, gulleys and grates. This no-hassle spray is easy to use, and prevents water ingress.

Ultracrete Instant Road Repair®: Cold Lay Asphalt product shot

Ultracrete Instant Road Repair®: Cold Lay AsphaltUltracrete Instant Road Repair (IRR) is a BBA/HAPAS Approved Permanent Cold Lay Asphalt Concrete for first time permanent reinstatements and pothole repairs in footways, footpaths, cycle tracks and type 3 & 4 roads. The product offers the benefits of an instant first time permanent reinstatement, which when compacted can be trafficked immediately. It is easy to use and boasts enhanced workability.

M45: Rapid Strength Bedding and Repair Mortar product shot

M45: Rapid Strength Bedding and Repair MortarA rapid strength bedding and repair mortar for use with all ironwork conforming to BS EN 124. Its rapid set properties make it perfect for emergency concrete road repairs, the levelling of street ironwork, bedding of kerbs, coastal protection and tidal repair projects.

M90: Multi-Purpose Fast Set Mortar product shot

M90: Multi-Purpose Fast Set MortarA mutli-purpose fast set mortar ideal for bedding ironwork and general repairs. It is suitable for use on all ironwork conforming to BS EN 124. It is shrinkage-compensated to prevent cracking and provides exceptional bond strength.

QC6: Rapid Setting Surfacing Concrete product shot

QC6: Rapid Setting Surfacing ConcreteA non-shrink, rapid-setting and versatile concrete designed for the surface reinstatement of 'picture frames' or fillets around street ironwork. Also highly suitable for general repairs to roads and pathways, concrete drives, pavements and surface areas surrounding street furniture. Its quick setting time aids the risk of damage to a newly reinstated area.

FP-1: Patch & Kerb Repair product shot

FP-1: Patch & Kerb RepairA two-component rapid repair mortar ideal for the reinstatement of small areas such as trip hazards, kerbs and steps where prompt access is required. It is ideal for smaller area applications where a consistent quality, ready mixed product is required.

Instaband: Overbanding Tape product shot

Instaband: Overbanding TapeA skid resistant overbanding tape specifically designed for application to asphalt or macadam to prevent water ingress and any further fretting. The polymer modified bituminous tape can be used in addition to the Ultracrete BBA/HAPAS Approved Reinstatement System, or it can be applied on its own for the sealing of reinstatement joints and general cracks up to 5mm wide.

LMP: Line Marking Paint product shot

LMP: Line Marking PaintA solvent based marking paint for line or spot marking in road and pothole repairs, car parks and warehouses, building sites, sports areas, excavation sites, mining, turf marking and landscape sites. The semi-permanent formula is effective for a least 3 months after application and offers a quick and effective spot marking solution.

Instaline: Thermoplastic Road Marking product shot

Instaline: Thermoplastic Road MarkingA pre-formed thermoplastic road marking system ideal for the reinstatement of small line marking areas on car parks, in roads and carriageways etc, after maintenance work has taken place to enable instant road opening. Simple to apply, safe to handle, and offers all the qualities of hot applied thermoplastic line marking within minutes!

Instagrip: Anti-Skid Patch Repair product shot

Instagrip: Anti-Skid Patch RepairA fast, cost-effective solution for anti-skid repairs. The product is suitable for the anti-skid patch repair of high friction surfacings typically placed on predestrian crossings, junctions, roundabouts, footbridges, subways and car parks etc. It is also ideal as an anti-skid surface on steel road plates and manhole cover frames.

Post Fix: Post Fix Concrete product shot

Post Fix: Post Fix ConcreteA rapid set concrete whic combines strength and durability, whilst significantly reducing the likelihood of damage due to movement at the point of fixing. This 10mm concrete sets in 15 minutes and is formulated for sub-surface use in the fast and efficient installation of posts, signs, fences, telephone and electricity poles, street lighting columns, street furniture, speed cameras and roadside barriers.

RSC: Extra Rapid Hardening Cement product shot

RSC: Extra Rapid Hardening CementAn extra rapid hardening cement ideal for concreting and mortar applications where early opening to traffic is essential. When mixed with site aggregates it produces a fast setting, early high strength mortar or concrete. It is ideal for use on cable box floors, road crossings, and sign and camera bases.

ZORBIT: The Recyclable Spillage Absorption Kit product shot

ZORBIT: The Recyclable Spillage Absorption KitA recyclable spillage absorption system that is the ideal addition to any Incident Support Unit or Fast Response Team, which nowadays forms part of the essential emergency response kit. It is a natural product that is extremely efficient in the rapid absorption of hydricarbon spillages, and is particualrly effective in cleaning up fuel and oil spills from carriageways. A 24 litre yield from a bag that weighs just 8kg, and a product that can be recycled up to 8 times through the Recycle Centre.

HF: High Strength Flowable Grout product shot

HF: High Strength Flowable GroutA cementitious, high strength, non-shrink flowable grout designed to accomodate depths of 10-100mm. A high flow precision grout that meets Department of Transport 2601 specification. A very dense, low permeability material that does not suffer damage from freeze/thaw conditions. Ideal as a bridge bearing grout, as well as for securing stanchion base plates, machine beds and parapet legs.

EP-R9: Epoxy Bedding & Concrete Mortar product shot

EP-R9: Epoxy Bedding & Concrete MortarA 2-part high strength epoxy resin mortar and primer system. Especially suitable for bedding granite setts, paving elements up to recess covers, tree grides and coping stones as well as concrete repair for areas subject to heavy wear-and-tear. The product contains a blend of specialist sands and fine fillers that provide exceptional strength, bond and chemical resistance which makes it ideal for pavement edge details, vehicle ramps and predestrian crossings.

FTC: High Strength Repair Concrete product shot

FTC: High Strength Repair ConcreteA high strength, fast set concrete, suitable for small and large section reinstatements to car parks, airports, warehouses and bridge decks. With an initial set of 1 hour the product can accommodate depths from 10-50mm. FTC is fibre-reinforced enabling excellent tensile strengths, which means it is suitable for trafficked areas. It also enables early application of waterproofing membranes due to its excellent moisture contents results after 24 hours.

PY5 - Flowable Rapid Set Mortar product shot

PY5 - Flowable Rapid Set MortarA polyester resin mortar with a proven track record. It produces a flowable material suitable for anchoring bolts or bars, bedding cats eyes, airport runway lights, backfilling manholes, bridge bearings, balustrades, traffic loops and sensors. The product is also perfect for grouting street furniture and traffic signs.

Pro-Prime: Slurry Primer product shot

Pro-Prime: Slurry PrimerUsed to provide an exceptional bond between your paving element and Ultrascape Pro-Bed HS (and ECO) fine bedding mortar. It can also be used to promote bond between the roadbase and the bedding mortar layer. Traditionally paving elemenst would have been laid directly onto bedding mortar but due to increasing traffic loads, street cleaning and wear & tear the paving would often break away - Pro-Prime prevents this costly concern.

Pro-Bed HS: Fine Bedding Mortar for Paving product shot

Pro-Bed HS: Fine Bedding Mortar for PavingA fine bedding mortar that is specifically formulated to meet and exceed the strict demands of BS7533 parts 7 & 12, pavements constructed with clay, natural stone or concrete pavers. The product provides a perfect bound base for natural stone paving and cobbles, concrete paving, flags and block paving, which once laid with Ultrascpae Pro-Bed HS, are able to accept foot traffic after just 12 hours and vehicular traffic after 24 hours.

Flowpoint: Flowable Paving Grout product shot

Flowpoint: Flowable Paving GroutA rapid setting flowable grout that exceeds the requirements of BS 7533. With a proven track record, spanning over 25 years, Flowpoint has met demands in both heavily trafficked and domestic paving environments long before the British Standard was introduced. It is fast and efficient to apply, affording the ability to grout large areas of paving quickly and cleanly, meaning areas can be open to foot traffic after just 1 hour.

Cempoint: Paving Mortar product shot

Cempoint: Paving MortarA gun injected mortar that provides a quick and clean method of jointing both horizontal and vertical surfaces (such as cladding). Combines the benefits of meeting the requirements of the exacting standards of BS 7533, with the convenience of being installed using a hand-held Cempoint Mortar Gun. Please contact Ultracrete Sales on 01827 871871 for gun enquiries.

Joint Fix: Paving Joint Sealer & Sand Stabiliser product shot

Joint Fix: Paving Joint Sealer & Sand StabiliserA resin based surface sealant and jointing sand stabiliser for use on flexibly constructed paved areas. Joint Fix is suitable for use on areasof light traffic, such as domestic driveways, and is also suitable for areas subject to extreme conditions, such as aiport taxi-ways, town centres and garage forecourts.

Pro-Bed HS ECO: Fine Bedding Mortar for Paving product shot

Pro-Bed HS ECO: Fine Bedding Mortar for PavingA fine bedding mortar that is specifically formulated to meet and exceed the strict demands of BS7544 parts 7 & 12, pavement sconstructued with clay, natural stone or concrete pavers. Containing 20% recycled glass, this product provides a perfect bound base for natural stone paving and cobbles, concrete paving, flags and block paving, which once laid with Ultrascape Pro-Bed HS ECOare able to accept foot traffic after just 12 hours and vehicular traffic after 24 hours.

Flowpoint ECO: Flowable Paving Grout product shot

Flowpoint ECO: Flowable Paving GroutA rapid setting flowable grout containing 20% recycled glass, that exceeds the strict requirements of BS 7533. With a proven track record, Flowpoint ECO has met demands in both heavily trafficked and domestic paving environments long before the British Standard was introduced. It is fast and efficient to apply, affording the ability to grout large areas of paving quickly and cleanly, meaning areas can be open to foot traffic in just 1 hour.

EP-R9: Epoxy Bedding Mortar product shot

EP-R9: Epoxy Bedding MortarA resinous mortar whcih provides exceptional strength amd bond for reas under extreme stresses. It is perfectly suited for bonding of steel, such as recessed manhole covers. it is entirely waterproof and chemical resistant once cured, making it ideal for use in water features. It can also withstand higher flexural strain than traditional sand and cement mortars.

Permanent Pothole Repair: Cold Lay Asphalt product shot

Permanent Pothole Repair: Cold Lay AsphaltPermanent Pothole Repair is the 1st ever and ONLY pothole repair material with HAPAS approval. Independantly tested by the BBA - suitable for both planned and reactive pothole repairs. It can be trafficked instantly in wet, freezing or hot conditions, and at the same time is compatible with the existing road surface. It is easy to use, boasting 'enhanced workability' and is supplied in 25kg recyclable containers (Instarmac Plastic Containers Recycling Scheme is available for this product).

Flowcon: Multi-Purpose Flowable Concrete product shot

Flowcon: Multi-Purpose Flowable ConcreteA general-purpose pre-blended flowable concrete ideal for most multi-purpose concreting applications, such as post fixing. It is ideal where a quality mix is required without the waste and inconsistency of site mixed materials. It requires only the addition of water and can be applied to depths of 20mm - 200mm in one pass.

QC10 F: Flowable Rapid Strength Concrete product shot

QC10 F: Flowable Rapid Strength ConcreteA two-part rapid strength concrete designed for carriageway ironwork backfill, thick section concrete repairs, haunching reinstatements, and post and barrier erection. QC10 F contains special cements and graded aggregate, and requiries only the addition of water on-site to form a high strength concrete. QC10 F is suitable for applications from 30-250mm in one pass.

Super Fix: Single Part Post Mix product shot

Super Fix: Single Part Post MixA rapid-hardening blend of cements, graded aggregates and additives formulated for the installation of posts, fences, and poles. The product is ready to use and requires no mixing. Easy Application! 1. Dig hole to the required dimensions, 2. Fill hole with approx. 2-3 litres of water (per 25kg bag), 3. Place post in the hole and pour Super Fix around the post, 4. Sprinkle water on top of the powder, until all powder is covered, 5. Adjust and level the post as required, 6. Super Fix will begin to set in 5-10 minutes, no curing required.

Perma-Soil: Soil Stabiliser product shot

Perma-Soil: Soil StabiliserAn alternative reinstatement material - for the backfill and reinstatement of small utility excavations. Converts unearthed spoil into reusable backfill, reducing the cost of landfill haulage, and the use of virgin aggregate. Provides an excellent backfill material-sub-base in minutes. Meets the requirements of the Utility WRAP Agreement. Can be used across a range of highway and footpath applications, as well as post, fence and utility post fixing.

CoverGrip: Anti-Skid Thermoplastic Sheets product shot

CoverGrip: Anti-Skid Thermoplastic SheetsA self-cleaning preformed thermoplastic anti-skid sheet and primer system for fast anti-skid treatment of in-situ and new road ironwork, such as manhole covers. Over time manhole covers can become smooth and polished by traffic flow, sometimes resulting in a full reinstatement. CoverGrip means such covers can be treated to provide the necessary PSRV 60. USe in conjunction with ThermoPrime for exceptional bond and durability. Leaves cover ID still visible.

Instaband ECO: Overbanding Tape product shot

Instaband ECO: Overbanding TapeA self-cleaning thermoplastic, skid-resistant overbanding and crack sealant tape designed for application to asphalt roads to prevent water ingress and progressive fretting, which leads to road structural failure. Prevents water ingress instantly and can be trafficked immediately.

ThermoPrime: Primer for Thermoplastics product shot

ThermoPrime: Primer for ThermoplasticsTo be used in conjunction with Ultracrete CoverGrip anti-skid thermoplastic sheets. This will provide an exceptional bond and durability between the metal sheet ironwork cover and the sheet itself. It also provides the same bond and durability when applying Ultracrete Instaband ECO and Ultracrete Instaline to concrete.

coverTEC D400: Composite Cover & Frame product shot

coverTEC D400: Composite Cover & FrameUltracrete coverTEC class D400 vehicular access covers are 3rd party certified by Lloyds British to fully comply with EN124: 1994 and offer a superior solution for vehicular access locations, and specifically for Group 4 applications where high speed traffic is prevalent.

coverTEC B125: Composite Cover & Frame product shot

coverTEC B125: Composite Cover & FrameUltracrete coverTEC Class B125 pedestrian access covers are 3rd party certified by Lloyds British to comply with EN124: 1994 and offer a superior solution for use in footpaths and cycle lanes, or where occasional vehicular access is required. Other uses include traffic signals, street lighting, telecommunications, cable television, CCTV, valve chambers and utilities.