Ultracrete
FP-1: Patch & Kerb Repair product shotFP-1: Patch & Kerb RepairA two-component rapi drepair mortar, comprising of a fully pre-blended cement/aggregate and a polymer modified liquid admixture: making on-site mixing fast and fool proof.  It is ideal for the reinstatement of small areas such as trip hazards, kerbs and steps where prompt access is required.  Compressive strength of 50N/mm² at 28 days.
HF: High Strength Flowable Grout product shotHF: High Strength Flowable GroutA high flow precision grout suitable for the infill of voids from 10-100mm.  The product is a very dense low permeability material, which does not suffer from freeze/thaw conditions.  As a result, HF is ideal as a bridge bearing grout, as well as for the securing of stanchion base plates, machine beds and parapet legs.  An exceptional compressive strength gain of 29N/mm² after 24 hours, and 70N/mm² at 28 days is acheived.  
EP-R9: Epoxy Bedding & Concrete Mortar product shotEP-R9: Epoxy Bedding & Concrete MortarA 2-part high strength epoxy resin mortar and primer system. Especially suitable for bedding granite setts, paving elements up to recess covers, tree grides and coping stones.  It is ideal for concrete repair for areas subject to heavy wear and tear.  EP-R9 is entirely waterproof and chemical resistant once cured, making it perfect for yard repairs and water features.  Compressive strength of 75N/mm² is reached after 7 days - so it is ideal for heavily trafficked areas.  Tensile and flexural strengths of 15.6N/mm² and 22.4N/mm² are reached after 7 days with a bond strength of 45N/mm².
FTC: High Strength Repair Concrete product shotFTC: High Strength Repair ConcreteA high strength, fast set concrete, suitable for small and large section reinstatements to car parks, warehouses and bridge decks.  With an initial set of just 1 hour, it can accomodate depths from 10-50mm (up to 100mm in pockets).  A compressve strength of 66N/mm² is reached at 28 days.  the material is fibre-reinforced which enables excellent tensile and flexural strengths of 4N/mm² and 9N/mm² at 28 days.  
PY5: Flowable Rapid Set Mortar product shotPY5: Flowable Rapid Set MortarA flowable polyester resin mortar suitable for anchoring bolts or bars, bedding cats' eyes, aiport runway lights, backfilling manholes, balustrades, traffic loops and sensors.  The product is also perfect for grouting street furniture and traffic signs.  A compressive strength of 85N/mm² is achieved after 1 hour, with a flexural strength of 21N/mm² and a tensile strength of 7.28N/mm².